| Environmental | IEC 60068-2-1 — Cold | Performance of a specimen under low-temperature conditions defined for the test. | Helps assess operation or storage in cold locations, such as unheated facilities or outdoor enclosures. | Temperature, duration, operating state, and acceptance criteria must be specified for the product and application. |
| Environmental | IEC 60068-2-2 — Dry heat | Performance of a specimen under elevated-temperature conditions defined for the test. | Can help assess display, touch sensor, and enclosure behavior in hot environments or during storage. | The test temperature and duration are selected for the intended use; the method alone does not define a universal product rating. |
| Environmental | IEC 60068-2-6 — Sinusoidal vibration | Resistance to specified sinusoidal vibration frequencies, amplitudes or accelerations, and durations. | Relevant to equipment mounted on machinery, vehicles, or other vibration-prone installations. | Test severity and mounting arrangement should reflect the installation and applicable product specification. |
| Environmental | IEC 60068-2-27 — Shock | Resistance to specified mechanical shock pulses; the test severity and pulse shape are selected for the test plan. | Helps assess exposure to impacts or sudden mechanical acceleration during use, transport, or handling. | A test result applies to the stated pulse, direction, number of shocks, and mounting configuration. |
| Environmental | IEC 60068-2-30 — Damp heat, cyclic | Effects of cyclic temperature and humidity conditions; condensation may occur during the test. | Relevant where equipment experiences changing temperature and high humidity, which can stress materials and seals. | Cycle details and acceptance criteria are set by the applicable test specification. |
| Environmental | IEC 60068-2-78 — Damp heat, steady state | Effects of high humidity at a controlled, steady temperature under the selected test conditions. | Can help assess moisture-related risks to display assemblies, connectors, and other components. | The selected temperature, relative humidity, duration, and functional checks should be documented. |
| EMC immunity | IEC 61000-4-2 — Electrostatic discharge (ESD) | Immunity to electrostatic discharges applied using specified contact or air-discharge test levels. | Relevant to discharges from operators, nearby objects, or accessible parts around a touch interface. | The standard includes test levels; the level, discharge points, and performance criteria used should be stated in the test report. |
| EMC immunity | IEC 61000-4-3 — Radiated RF electromagnetic field | Immunity to radiated radio-frequency electromagnetic fields at specified frequencies and field strengths. | Helps assess whether nearby radio transmitters or wireless equipment may disturb display or touch operation. | Frequency range, field strength, modulation, and performance criteria depend on the applicable test plan. |
| EMC immunity | IEC 61000-4-4 — Electrical fast transient / burst | Immunity to repetitive fast transients coupled to power, signal, control, or earth ports as applicable. | Relevant to disturbances associated with switching operations and inductive loads in industrial installations. | Test level, coupling method, port, and acceptance criteria should be recorded for each test. |
| EMC immunity | IEC 61000-4-5 — Surge | Immunity to specified surge voltages and currents, commonly using a combination-wave generator. | Helps evaluate exposure of connected ports to transient overvoltages, including those associated with switching or lightning effects. | Applicable ports, coupling, test level, and any required protective devices depend on the product and installation. |
| EMC immunity | IEC 61000-4-6 — Conducted RF disturbances | Immunity to conducted radio-frequency disturbances coupled onto cables within the standard’s applicable frequency range. | Relevant when power or signal cables may pick up RF energy in electrically noisy environments. | The selected frequency range, level, coupling method, and performance criteria should be documented. |
| EMC immunity | IEC 61000-4-8 — Power-frequency magnetic field | Immunity to magnetic fields at power frequency under specified test conditions. | May be relevant when a display is installed near transformers, motors, or other sources of power-frequency magnetic fields. | Test level, orientation, duration, and operating conditions are defined by the selected test plan. |
| EMC requirements | IEC 61000-6-2 — Generic immunity standard for industrial environments | Sets immunity requirements for equipment intended for industrial environments when no relevant product or product-family immunity standard applies. | Provides a framework for assessing immunity to electromagnetic disturbances in industrial settings. | Check whether a product-specific standard applies and identify the edition and test methods used. |
| EMC requirements | IEC 61000-6-4 — Generic emission standard for industrial environments | Sets emission requirements for equipment intended for industrial environments when no relevant product or product-family emission standard applies. | Helps assess whether emissions from the display may cause unacceptable interference with other equipment. | Applicable limits and measurement methods depend on the standard edition, equipment classification, and test configuration. |
| System verification | Functional monitoring during and after testing | Checks defined functions before, during, and after exposure, such as image stability, touch response, and recovery. | Connects laboratory test results to the display’s intended operation in the final system. | Acceptance criteria should be defined in advance; passing a test does not by itself establish suitability for every installation. |