| 1. Design and specification review | Panel dimensions, skin materials, core type, joint details, and project requirements are confirmed before fabrication. | Defines the panel’s thickness, edge profile, surface finish, and intended performance. | Check drawings, dimensions, material specifications, and opening locations. |
| 2. Material preparation | Metal facings and core materials—such as mineral wool or foam—are selected, inspected, and prepared for assembly. | Provides the surface layers and insulating or fire-performance core that make up the panel. | Inspect materials for damage, contamination, incorrect thickness, or visible defects. |
| 3. Facing cutting and forming | Facings are cut to the required size and, where specified, folded or formed at the edges using suitable workshop tools. | Establishes the panel’s length, width, edge returns, and connection details. | Measure cut dimensions and check folds for alignment, straightness, and damage. |
| 4. Core cutting and fitting | The core is cut to fit between the facings and around any required edge details or openings. | Sets the panel’s core thickness and helps create a close-fitting assembly. | Check core dimensions, fit, and continuity; confirm that gaps are within project tolerances. |
| 5. Adhesive application | When required by the panel design, adhesive is applied to the facing, core, or both, following the specified application method. | Helps bond the layers together and supports a stable panel assembly. | Verify adhesive type, coverage, working time, and application conditions against the specification. |
| 6. Manual layer assembly | Workers position the core between the inner and outer facings, align edges, and assemble any specified joints or reinforcements. | Brings the panel layers together and establishes its final orientation and edge geometry. | Check alignment, edge fit, surface cleanliness, and location of inserts or reinforcements. |
| 7. Pressing and bonding | The assembled panel is held under controlled pressure or in a suitable fixture while the bond develops, when the construction requires it. | Helps maintain contact between layers and limits movement during bonding. | Confirm pressing conditions and curing time follow the adhesive and process requirements. |
| 8. Edge finishing and trimming | Excess material is trimmed, and exposed edges or joints are finished according to the panel design. | Creates clean edges and prepares the panel for connection to adjacent panels or components. | Inspect edge straightness, joint dimensions, finish quality, and any specified sealant application. |
| 9. Final inspection and packing | Finished panels are checked, identified by dimensions or order requirements, and protected for handling and transport. | Confirms the completed panel is ready for installation without avoidable surface or edge damage. | Review dimensions, appearance, labels, and packing protection; record any nonconformities. |