| Cartridge rod heater | Resistive wire is insulated from a metal sheath, commonly stainless steel, and compacted for efficient heat transfer. | Heating dies, molds, platens, packaging equipment, and other solid metal parts. | Inserted into a drilled hole, usually with a close fit to the surrounding material. | Match the heater diameter and length to the bore. Consider wattage, operating temperature, fit, and lead-wire protection; poor fit can shorten service life. |
| Tubular rod heater | A resistance element is embedded in electrically insulating material inside a metal tube; the tube can be formed into different shapes. | Ovens, industrial equipment, air heating, and custom heating assemblies. | Mounted with brackets, clamps, or purpose-designed supports, depending on the assembly. | Choose a shape and sheath material suited to the installation. Allow for thermal expansion and avoid contact with materials the sheath cannot withstand. |
| Screw-plug immersion heater | One or more tubular heating elements are attached to a threaded fitting that seals into a tank or vessel. | Heating water, oils, and compatible process liquids in tanks and smaller vessels. | Screwed into a matching threaded opening, with the heated portion immersed in the liquid. | Verify thread size, liquid compatibility, required heat output, and minimum liquid level. The elements must remain covered during operation. |
| Flanged immersion heater | Tubular heating elements are secured to a flange for installation in a vessel or tank opening. | Process tanks and larger vessels requiring a removable, sealed heater assembly. | Bolted to a compatible vessel flange or mounting nozzle. | Check flange dimensions, pressure and temperature requirements, sheath compatibility, and liquid coverage. Provide appropriate temperature controls. |
| Circulation heater | Immersion elements are installed in a pressure-rated chamber through which a liquid or gas flows. | Inline heating of process liquids, water, and gases in piping systems. | Connected into the process line, with the flow routed through the heater chamber. | Confirm the medium, flow rate, pressure, temperature rise, and chamber materials. Adequate flow helps prevent localized overheating. |