| 1 | Confirm exact vehicle fitment | Match the vehicle application, model year, engine variant, transmission, and cooling-system configuration. Do not rely on appearance alone. | Application list, dimensional drawing, connection locations, and cross-reference information for the relevant vehicle specification. | Confirm that the application covers the vehicle version sold or operated in the destination country; equipment can differ by market. |
| 2 | Check core and overall dimensions | Compare core size, tank layout, mounting points, inlet and outlet positions, and clearance for fans, shrouds, and nearby components. | Dimensioned drawing or sample inspection record, including units and measurement tolerances. | Check units, packaging dimensions, and any local-language marking or documentation needs for import and installation. |
| 3 | Review materials and construction | Identify the radiator's core, tank, joint, and seal materials, and confirm compatibility with the specified coolant and service conditions. | Bill of materials or material declarations, construction details, and coolant-compatibility information. | Check applicable restrictions on substances and required product declarations in the destination market; requirements vary by jurisdiction. |
| 4 | Request pressure and leak-test details | Confirm the test method, test pressure, duration, acceptance criteria, and whether the evidence applies to the offered production design. | Test report or inspection record showing the sample identification, method, conditions, results, and pass/fail criteria. | Ask whether local vehicle regulations, customer specifications, or import requirements call for particular records or declarations. |
| 5 | Evaluate thermal-performance evidence | Compare performance only under stated test conditions, including coolant flow, air flow, inlet temperatures, and measurement method. | Thermal test report with test setup, operating conditions, measured results, and the applicable vehicle or customer requirement. | Consider the destination's expected ambient and operating conditions, but use vehicle-specific engineering requirements rather than a generic rating. |
| 6 | Check vibration evidence carefully | Ask whether vibration testing was performed on the radiator or a representative assembly, and whether the mounting and boundary conditions match the intended installation. | Request the test standard and edition, profile or severity, axes, mounting method, duration, sample details, and post-test inspection results. If ISO 16750-3 is cited, verify the specific test procedure and its applicability to the component and customer specification. | Confirm whether the vehicle manufacturer or destination-market customer specifies an adapted vibration profile. A reference to ISO 16750-3 alone does not establish that every radiator application is covered. |
| 7 | Inspect corrosion and durability claims | Ask which parts and surfaces were tested, what exposure method was used, and how results were assessed. Avoid comparing claims that use different methods. | Corrosion or durability report identifying the test method, exposure conditions, sample preparation, evaluation criteria, and results. | Review local road-salt, coastal, humidity, and service conditions alongside the vehicle specification; these conditions do not replace defined test requirements. |
| 8 | Verify production consistency | Understand how incoming materials, joining processes, dimensions, and final leak checks are controlled across production lots. | Quality-control plan, lot traceability approach, inspection records, and a description of corrective-action handling. | Check any customer-specific quality-system, traceability, or record-retention requirements before placing an order. |
| 9 | Review packaging and transport protection | Check protection for fins, ports, mounting tabs, and the radiator core, as well as moisture protection and handling instructions. | Packaging specification, handling labels, and evidence that packaging is suitable for the agreed transport mode. | Confirm shipping marks, language, palletization, and import-document requirements with the importer or customs broker. |
| 10 | Confirm compliance and documentation scope | Distinguish mandatory legal requirements from customer specifications and voluntary certifications. Verify that each document refers to the offered product and application. | Applicable declarations, test reports, product identification, installation information, and revision-controlled technical documents. | Check current rules with the relevant market authority or qualified compliance adviser. Requirements can differ by country, vehicle category, and intended use. |