| Standard polyolefin (POF) | Usually a multilayer polyolefin film. Clear, flexible, and generally resistant to punctures for light- to medium-duty packaging. It can provide a close-fitting finish around varied product shapes. | Approximately 120–160°C (248–320°F), depending on film grade, thickness, airflow, and line speed. | Books, toys, cosmetics, household goods, retail sets, and other general consumer products. | A versatile option for many retail packages. Confirm that the specific grade and packaging process meet any applicable food-contact requirements. |
| Cross-linked polyolefin (POF) | Polyolefin film modified through cross-linking to improve strength and resistance to tearing or puncture during shrinking. It can perform well on products with corners or irregular shapes. | Often approximately 120–160°C (248–320°F); follow the film supplier’s processing guidance. | Multi-packs, boxed products, sharp-cornered items, and packages requiring a tougher, tighter finish. | Useful when standard film may split or lose package integrity. Correct sealing and shrink settings remain important. |
| Polyethylene (PE) | A relatively strong, flexible film commonly available in thicker gauges. Compared with POF, it is often selected for heavier loads and bundling rather than for a fine, high-clarity retail finish. | Approximately 120–180°C (248–356°F), with the actual range depending on grade and equipment. | Beverage or container multipacks, industrial products, cartons, and other heavier bundles. | Consider film thickness, load weight, and the desired package appearance. PE is not interchangeable with every POF sealing or shrinking setup. |
| Polyvinyl chloride (PVC) | Can shrink at relatively modest temperatures and may provide good clarity. Its use is more limited in some packaging settings because handling, recycling, and regulatory considerations vary by application and location. | Often approximately 100–130°C (212–266°F); grade-specific settings apply. | Some non-food retail goods, gift items, and smaller products where PVC is suitable for the application. | Check local requirements and end-use suitability, especially for food packaging. Avoid assuming that PVC and polyolefin have the same environmental or processing characteristics. |
| Barrier shrink bags | Typically multilayer structures that may combine polyamide (nylon) and polyethylene, sometimes with an oxygen-barrier layer such as EVOH. Barrier performance depends on the construction. | Varies by structure; many grades are processed in a range broadly similar to other shrink films, but supplier specifications should take precedence. | Selected fresh or processed foods, cheese, and products that need improved oxygen or moisture control. | Choose based on required barrier performance, seal integrity, storage conditions, and food-contact rules. Not every barrier bag is suitable for every food or process. |