| Progressive-Density Polyester | Nonwoven synthetic fibers with a looser upstream face and a denser downstream structure; commonly supplied in rolls. | Panel filters, cut-to-size frames, and some reusable or replaceable pre-filter assemblies. | General ventilation and dust pre-filtration where a balance of particle capture, airflow, and dust-holding capacity is needed. | Confirm the required thickness, face velocity, pressure-drop limit, and frame fit. Efficiency depends on the media grade and test method. |
| Flat Polyester Nonwoven | Uniform or lightly layered polyester web available in different thicknesses, densities, and basis weights. | Roll-fed filter units, flat panels, and custom-cut filters for air-handling equipment. | Routine HVAC and industrial ventilation applications with relatively steady airflow and moderate dust loading. | Match the roll width and thickness to the equipment. Check whether the media is intended for single-pass use or can be cleaned. |
| Fiberglass Filter Media | Random-laid glass fibers, often formed as a progressively structured web; binder and facing details vary by grade. | Panel filters and roll-fed air filtration systems designed for fiberglass media. | Applications requiring a fibrous depth structure; suitable grades are used in HVAC and selected industrial air systems. | Check fiber containment, handling requirements, pressure drop, and compatibility with the frame. Confirm temperature limits for the complete media, including binders and facings. |
| Synthetic–Cellulose Blend | Combined synthetic and cellulose fibers, with blend proportions and surface treatments varying by product. | Panel filters, intake filters, and equipment using roll goods converted into filter pads. | General-purpose air filtration where buyers need a balance of cost, handling strength, and dust capture. | Ask for test data at the intended airflow. Humidity, moisture exposure, and any water-repellent treatment can affect suitability. |
| High-Loft Paint Arrestor Media | Open, bulky nonwoven web, commonly made from synthetic fibers or fiberglass, designed to retain overspray within its depth. | Paint-booth exhaust banks and roll-fed overspray arrestor systems. | Paint-spray capture where airflow resistance and paint-loading capacity must be considered together. | Choose the grade for the coating process and booth airflow. Verify airflow direction, loading capacity, and local disposal requirements for paint-laden media. |
| Needled Polyester Felt | Dense, mechanically entangled polyester fibers, often supplied as heavier roll goods than standard HVAC webs. | Industrial dust collectors and filter systems that use roll material for custom-made bags, sleeves, or panels. | Dry particulate collection in systems designed for felt media and suitable cleaning cycles. | Confirm compatibility with the dust chemistry, cleaning method, temperature, and required surface treatment. Do not substitute for a specified filter-bag grade without system review. |
| Activated-Carbon-Loaded Nonwoven | Nonwoven support web incorporating activated carbon particles or granules for adsorption. | Odor-control panels, ventilation cartridges, and equipment designed for carbon-loaded roll media. | Gas-phase odor or vapor reduction in addition to particulate filtration, where contaminant levels and exposure conditions are defined. | Carbon media does not replace a correctly sized particulate filter. Confirm target compounds, contact time, humidity, and replacement criteria with the system designer. |
| Melt-Blown Polypropylene | Fine-fiber thermoplastic web, sometimes supplied as a layer within a composite roll structure. | Pre-filter layers and selected liquid or air filtration assemblies designed for the media format. | Applications requiring fine-fiber capture, subject to the specified liquid, temperature, and chemical compatibility. | Check whether the media is hydrophobic or treated, and verify compatibility with the fluid and operating pressure. Air and liquid performance are not interchangeable. |