| Wire connectors and terminal blocks | Electrical wires joined to other wires or to equipment terminals. | Lighting circuits, junction boxes, control panels, and household appliances. | Conductive metal contacts in an insulating body; connection methods include screw, spring, or push-in designs. | Confirm applicable national electrical rules and product ratings. Check conductor size range, rated voltage and current, temperature rating, and suitability for the installation environment. | Metal stamping or machining, insulating-part molding, secure termination assembly, dimensional inspection, and electrical continuity testing. |
| Appliance couplers and power inlets | A power cord to an appliance or other electrical equipment. | Removable power connections for certain appliances and electronic equipment. | Molded insulating housings with metal contacts; configurations vary by appliance and market. | IEC 60320 covers appliance couplers. Verify the exact connector type, temperature class, ratings, and destination-market approvals for the intended application. | Contact forming, housing molding, assembly control, fit and retention checks, and tests for electrical and thermal performance. |
| Coaxial connectors | Coaxial cable to televisions, antennas, or signal equipment. | Television antenna and cable-signal connections in homes. | Center conductor, dielectric insulator, surrounding shield, and an outer connector body. | Check connector interface, cable compatibility, impedance, shielding, and signal-frequency requirements for the system. | Precision turning or forming, plating control, cable-termination consistency, dimensional inspection, and signal-performance testing. |
| Data and network connectors | Network cables to routers, switches, wall outlets, and connected devices. | Residential Ethernet wiring and home networking. | Insulated modular connector bodies with metal contacts; the installed link also depends on cable and termination quality. | Check the required connector interface and the applicable cabling category and installation requirements. Validate the complete link, not only the connector component. | Contact stamping and plating, precision molding, pin-position inspection, termination-process control, and connectivity testing. |
| USB connectors and receptacles | Charging or data cables to compatible devices and power supplies. | Phones, tablets, accessories, and other household electronics. | Metal contacts in an insulating housing; connector type and supported functions depend on the product design. | Confirm the specified USB connector type, power capability, data requirements, and applicable USB specifications for the product. | Fine-contact stamping, plating, tight-tolerance molding, insertion and retention checks, and power or data-function testing. |
| EV charging connectors | An electric-vehicle charging cable or charging station to an electric vehicle. | Residential electric-vehicle charging installations. | Insulated connector housing with power and signal contacts; designs vary by region and charging system. | IEC 62196 covers plugs, socket-outlets, vehicle connectors, and vehicle inlets for conductive charging. Verify the regional interface and charging-system requirements. | High-current contact manufacture, robust housing assembly, temperature-rise and mechanical checks, and validation of sealing and electrical safety where applicable. |