| Dyed polyester film | Approximately 5%–50%, depending on shade | Often around 95%–99% for products with UV-absorbing layers | Generally modest; heat performance varies by construction | Dark shades reduce glare and increase daytime privacy | Non-metallic construction generally does not interfere with radio, GPS, or mobile signals | Usually an economical option with a uniform appearance. Color stability and fading resistance depend on materials and manufacturing quality. |
| Metallized film | Approximately 5%–50%, depending on shade and design | Often around 95%–99% when specified with UV protection | Can reflect a significant portion of solar heat; results depend on metal layer and test method | Offers glare reduction; may have a reflective appearance | Metal layers may weaken some radio, GPS, mobile, or toll-transponder signals | Reflective construction can improve solar rejection, but buyers should check signal compatibility and the appearance permitted by local regulations. |
| Carbon film | Approximately 5%–50%, depending on shade | Often around 95%–99% when UV-blocking materials are included | Typically better heat control than basic dyed film; actual performance varies by product | Reduces glare and provides a non-metallic, matte appearance | Non-metallic construction generally maintains normal electronic signal reception | Often selected for color stability and a subdued finish. Confirm heat-rejection figures using the supplier’s stated test conditions. |
| Ceramic or nano-ceramic film | Approximately 5%–70%, with lighter options available | Often around 95%–99% for products with a dedicated UV-blocking layer | Can provide strong solar and IR control while retaining higher VLT; performance differs between products | Available in light and dark shades for glare control and privacy | Non-metallic ceramic construction generally avoids metal-related signal interference | Higher-performance option often chosen when heat rejection and signal compatibility are priorities. Compare total solar energy rejection as well as IR figures. |
| Opaque blackout or privacy film | Near 0% for fully opaque products | May block most UV, but coverage depends on the film’s construction | Blocks direct light through covered areas; heat performance is product-specific | Provides near-total visual privacy where installed | Non-metallic versions generally do not cause metal-related signal interference | Not suitable for windshields or windows required for driver visibility. Check vehicle-glazing rules and avoid obstructing required sightlines. |
| Clear UV-protection film | Usually high, commonly above 70% | Often around 95%–99% when designed for UV protection | Limited to moderate heat reduction unless the product includes advanced solar-control layers | Little privacy or glare reduction compared with darker films | Typically non-metallic; verify the construction with the supplier | Useful when UV protection is desired without a dark appearance. High VLT does not by itself indicate strong heat rejection. |