| 1 | Product and process capability | Confirm the supplier can produce the required tube geometry, fin arrangement, headers, joints, and connection details for the specified evaporator design. | Request drawings, process-flow details, and samples representative of the proposed production process. |
| 2 | Material and alloy control | Check alloy and temper, tube and fin material specifications, material compatibility, and any restrictions required for the refrigerant and operating environment. | Review material certificates and incoming inspection records; specify the required alloy, temper, and applicable material standard in the purchase documents. |
| 3 | Dimensional consistency | Assess control of tube diameter and wall thickness, coil or core dimensions, fin spacing, connection locations, and drawing tolerances. | Ask for a dimensional inspection report based on the approved drawing and confirm measurement methods for critical features. |
| 4 | Thermal performance validation | Compare capacity, airflow or refrigerant-side pressure drop, and other performance data only when test conditions match the intended operating conditions. | Request test reports stating refrigerant, inlet conditions, airflow, test method, and measurement uncertainty; agree acceptance limits before production. |
| 5 | Pressure and leak testing | Verify the design pressure and the inspection or test requirements appropriate to the product, refrigerant, and applicable regulations. | Agree the test method, pressure, duration, sampling plan, and leak acceptance criteria in writing; request calibrated equipment and recorded results. |
| 6 | Joining and workmanship | Inspect brazed, welded, or mechanically joined areas for consistency, cleanliness, alignment, and signs of damage or blockage. | Review process controls and inspection criteria; evaluate pre-production samples and define defect limits with visual references where practical. |
| 7 | Quality management and traceability | Check whether documented quality controls cover incoming materials, production inspections, nonconforming product, corrective actions, and lot identification. | Verify current certification and its scope where relevant, and ask for a sample inspection record and a demonstration of batch traceability. |
| 8 | Corrosion and service environment | Consider humidity, salt exposure, condensate drainage, dissimilar-metal contact, and any required coating or surface treatment. | Define the intended environment and required validation. Treat accelerated corrosion results as comparative evidence, not a direct guarantee of service life. |
| 9 | Compliance and documentation | Identify destination-market requirements for materials, restricted substances, product safety, labeling, and technical documentation. | Request declarations and supporting documents applicable to the specific product and market; verify that documents cover the supplied configuration. |
| 10 | Capacity, delivery, and total cost | Evaluate production capacity, lead-time assumptions, minimum order quantities, packaging, shipping terms, change control, and after-sales response. | Request a written quotation and production schedule; clarify packaging protection, inspection rights, warranty terms, and how design or material changes are approved. |