| 01 · Pipeline service | Onshore or offshore transmission and process pipelines | Butt-weld ends; confirm pipe schedule, end preparation, and bore matching. Size range is model-dependent. | Check the specified ASME pressure class and whether the design is suitable for the pipeline code and service conditions; API 6D may be relevant. | Carbon steel or low-temperature carbon steel; confirm trim and seat compatibility with the fluid. | Request design documentation, pressure-test records, material traceability, and applicable API 6D evidence. |
| 02 · High-pressure process service | Refineries, chemical plants, and high-pressure process lines | Welded ends can reduce flange joints; verify wall thickness, welding procedure requirements, and installation access. | ASME B16.34 and applicable ASME pressure classes, such as Class 300–2500, may be relevant; confirm the specific pressure-temperature rating. | Carbon steel, alloy steel, or stainless steel, selected for pressure, temperature, and corrosion conditions. | Review pressure-temperature tables, design calculations, inspection records, and pressure tests to the specified standard. |
| 03 · Corrosive chemical service | Chemical processing and corrosive liquid or gas duties | Confirm weld-end dimensions and whether the valve’s internal surfaces and seats suit the process fluid. | Specify the governing design and test standards; pressure class alone does not establish chemical compatibility. | Stainless steel or other corrosion-resistant alloys where justified; verify wetted-part materials against the process chemistry. | Request material certificates, wetted-parts list, corrosion compatibility confirmation, and test documentation. |
| 04 · Low-temperature service | Refrigeration, low-temperature processing, and cryogenic applications | Check extended bonnet or other required configuration, end dimensions, and installation orientation. | Confirm design temperature limits, pressure-temperature ratings, and any required low-temperature testing. | Low-temperature-qualified carbon steel or stainless steel, as appropriate to the minimum design temperature. | Request impact-test records where specified, material traceability, and documented low-temperature qualification. |
| 05 · High-temperature service | Steam, hot oil, and elevated-temperature process lines | Verify thermal expansion allowances, end preparation, and the specified pipe schedule. | Check the pressure-temperature rating at operating temperature and the applicable design standard. | Temperature-appropriate carbon or alloy steel; confirm seat, seal, and stem materials for the full temperature range. | Request temperature limits for all pressure-containing and sealing components, plus inspection and pressure-test records. |
| 06 · Gas and fugitive-emissions service | Gas processing and services with defined external-emissions requirements | Confirm stem-sealing design, welded-end details, and compatibility with the line’s operating conditions. | Specify the required emissions qualification; ISO 15848 is a relevant reference when required by the project. | Materials should be selected for the gas composition, pressure, temperature, and decompression conditions. | Request the applicable emissions test report and clarify its tested configuration, conditions, and qualification scope. |
| 07 · Fire-safe process service | Hydrocarbon processing and installations with fire-safe valve requirements | Check that the offered welded-end model—not only a related model—has the required qualification. | API 607 or API 6FA may be specified, depending on the valve and project requirements. | Confirm body, seat, and secondary sealing materials for both normal operation and the specified fire-test requirements. | Request a fire-test certificate or report identifying the tested design and applicable size and pressure range. |
| 08 · Utility and general industrial service | Water, air, and general plant utility systems | Match bore and weld ends to the piping specification; verify the required face-to-face or end-to-end dimensions. | Define the required pressure class, operating temperature, and project test standard before comparing quotations. | Common options include carbon steel and stainless steel, subject to fluid quality and corrosion requirements. | Compare dimensional drawings, material records, pressure-test documentation, and stated inspection scope. |
| 09 · Severe-service or specialized duty | Applications involving demanding pressure, temperature, cycling, or process conditions | Assess valve geometry, flow requirements, actuator interface, weld access, and maintenance strategy. | Use the project’s specified design code and operating envelope; confirm limits for the exact valve configuration. | Specify body, trim, seat, and seal materials from the process conditions rather than from a generic material list. | Request application references, engineering review, inspection plan, and qualification evidence relevant to the duty. |
| 10 · Project and custom-engineered supply | Large projects with project-specific documentation, traceability, or configuration needs | Confirm drawing approval process, weld-end tolerances, pipe schedule, and any project-specific dimensional requirements. | List all applicable design, testing, and project standards in the purchase specification; avoid relying on a generic class label. | Document approved materials for pressure boundary, trim, seats, and seals, including any project-specific restrictions. | Evaluate document index, inspection and test plan, material traceability, nonconformance process, and delivery documentation. |