| 1 | Basic device design | A wearable facial device containing multiple light-emitting diodes (LEDs), a controller, and a power source. | LEDs deliver non-thermal light to the skin. Masks differ in fit, LED placement, materials, controls, and whether they are wired or rechargeable. |
| 2 | Red-light wavelength | Many consumer and professional devices specify red light in approximately the 630–660 nm range. | Red light is commonly used in photobiomodulation research and skincare devices. Wavelength alone does not determine treatment performance; dose and exposure also matter. |
| 3 | Near-infrared wavelength | Some masks add near-infrared LEDs, often in the approximately 810–850 nm range. | Near-infrared light is not visible to the eye and may be used alongside red light. Whether it is included and how it is delivered should be confirmed in the device specifications. |
| 4 | Blue-light wavelength | Blue-light modes commonly use wavelengths around 405–420 nm. | Blue light is used in some acne-focused devices. Its suitability depends on the intended use, device design, and user guidance; it is not interchangeable with red or near-infrared light. |
| 5 | Photobiomodulation mechanism | Photobiomodulation describes biological responses to selected light wavelengths and doses; it does not mean that the device heats or resurfaces the skin. | Light may interact with cellular photoacceptors and influence cellular signaling. Proposed mechanisms and clinical outcomes depend on the wavelength, dose, treatment schedule, and evidence for the specific device. |
| 6 | Irradiance and dose reporting | Ask for measured irradiance at the skin in mW/cm² and the delivered fluence in J/cm². Fluence is calculated as irradiance × exposure time. | These measurements help describe the light reaching the treatment area. A power rating or LED count by itself does not establish the dose delivered to the skin. |
| 7 | Session duration and controls | Home-use instructions commonly specify timed sessions, often around 10–20 minutes, but the correct duration is device-specific. | Automatic shutoff, clearly defined modes, and consistent instructions help users follow the device’s intended treatment schedule. Avoid assuming that longer exposure is more effective. |
| 8 | LED layout and facial coverage | LED count, spacing, mask curvature, and distance from the skin vary between designs. | Layout affects coverage and the distribution of light across the face. Suppliers should provide technical drawings or test information supporting their coverage claims. |
| 9 | Safety and compliance documentation | Request the applicable electrical, optical-radiation, material, and market-specific regulatory documentation for the exact model. | Requirements differ by sales market and intended use. A general certificate or a document for another model does not by itself confirm compliance for the product being purchased. |
| 10 | Manufacturing and quality checks | Compare documented quality controls for LED wavelength and output, electrical safety, product consistency, traceability, and final inspection. | Ask how measurements are taken, whether production batches are tested, and how defects are handled. Independent test reports should identify the tested model and test conditions. |