| 1 | Low-voltage capacitor-bank manufacturer | Fixed and automatically switched capacitor banks; contactor- or thyristor-switched steps; discharge devices and protection components. | Commercial buildings, factories, and low-voltage distribution systems. | IEC 61921 for low-voltage power-factor-correction banks; IEC 60831-1 and IEC 60831-2 for self-healing shunt power capacitors. | Load and kvar assessment, step-sizing recommendations, wiring diagrams, and commissioning instructions. | Confirm rated voltage, switching duty, enclosure rating, temperature limits, and capacitor discharge provisions. |
| 2 | Medium- and high-voltage capacitor-system supplier | Shunt capacitor units, banks, switching equipment, protection, and discharge components. | Utility substations and industrial networks operating above low voltage. | IEC 60871-1 and IEC 60871-2 for shunt capacitors above 1,000 V; applicable installation and grid requirements should also be specified. | System studies, protection coordination, bank configuration advice, and installation documentation. | Check system voltage, insulation level, switching transients, fault duty, and local utility requirements. |
| 3 | Low-voltage switchboard and panel integrator | Engineered capacitor-bank panels assembled with capacitors, switching devices, controllers, and protective equipment. | Customer-specific plant distribution boards and retrofit projects. | IEC 61439-1 and IEC 61439-2 for applicable low-voltage switchgear and controlgear assemblies; IEC 61921 for PFC-bank requirements. | Panel drawings, component coordination, factory inspection, and installation support. | Request assembly verification details, short-circuit ratings, thermal design information, and a component schedule. |
| 4 | Detuned capacitor-bank specialist | Capacitor banks combined with series reactors to reduce the risk of harmful resonance in harmonic-producing networks. | Sites with variable-speed drives, rectifiers, UPS systems, or other nonlinear loads. | IEC 61921 and IEC 60831 for applicable bank and capacitor requirements; reactor ratings and harmonic design criteria should be documented. | Harmonic measurements or load data review, detuning design, and commissioning checks. | Require a resonance and harmonic assessment; do not select a detuning factor without considering the network spectrum. |
| 5 | Active harmonic-filter and power-quality supplier | Active filters that compensate selected harmonic currents and may provide reactive-power compensation, depending on configuration. | Dynamic industrial loads and installations where harmonics and changing reactive demand must both be addressed. | Applicable IEC 61000 series requirements and site-specific grid or utility limits; verify the exact product test and compliance documentation. | Power-quality analysis, load profiling, filter sizing, and post-installation measurements. | Confirm whether the proposed equipment corrects displacement power factor, harmonics, or both, and define the required operating modes. |
| 6 | Fast-switching PFC equipment supplier | Rapidly switched capacitor steps, often using thyristor switching, for loads with frequent or abrupt changes. | Welding lines, cranes, presses, and other installations with rapidly varying reactive power. | IEC 61921 and IEC 60831 for applicable capacitor-bank and capacitor requirements; specify switching and thermal duty separately. | Dynamic load assessment, switching-cycle recommendations, and commissioning support. | Check response time, switching frequency, inrush-current control, and suitability for the actual load cycle. |
| 7 | Industrial electrical-equipment OEM | Power-factor-correction packages integrated with motor-control centers, process equipment, or plant electrical systems. | Manufacturing facilities and packaged industrial installations. | IEC 61921, IEC 60831, and applicable assembly standards such as IEC 61439, as relevant to the supplied equipment. | Interface engineering, equipment coordination, operating documentation, and project-level commissioning. | Clarify responsibility for site studies, upstream protection, harmonic evaluation, and integration with plant controls. |
| 8 | Utility and infrastructure project supplier | Engineered capacitor banks and associated switching and protection equipment for network-support projects. | Transmission and distribution substations, renewable-energy connections, and large infrastructure sites. | IEC 60871 for applicable high-voltage shunt capacitors, together with project-specific grid codes and utility specifications. | Network studies, design submissions, protection documentation, and site acceptance-test support. | Verify that ratings, protection schemes, and testing requirements match the project specification and grid operator requirements. |
| 9 | Regional distributor and system integrator | Locally sourced capacitor banks, replacement capacitors, controllers, reactors, and related components. | Maintenance, replacement, and smaller retrofit projects across a regional service area. | Check the standards and certificates for the actual components and assembled equipment; IEC 61921 and IEC 60831 may apply to relevant products. | Product selection, spare-parts availability, local installation coordination, and basic troubleshooting. | Confirm the original equipment ratings, traceability, warranty terms, and availability of compatible replacement parts. |
| 10 | Power-quality engineering and retrofit specialist | Audits, measurement-based PFC upgrades, capacitor-bank replacements, and combined harmonic-mitigation solutions. | Existing facilities with poor power factor, nuisance trips, overheating, or changing electrical loads. | Relevant IEC 61921, IEC 60831, and IEC 61000 series requirements, selected according to the equipment and project scope. | On-site measurements, before-and-after verification, commissioning, and maintenance recommendations. | Request measurement methods, stated performance targets, and documented results under representative operating conditions. |
| Comparison note: The rows are anonymous supplier capability profiles, not named companies or a verified ranking. Product ranges, certifications, and support services vary by supplier and market. Standards listed are relevant references to confirm for the specific product, project, and applicable national requirements; they do not imply that every supplier or product complies. |