| 1 | 3D-printing material experience | Confirm experience with the specific substrate, such as SLA resin, SLS nylon, or FDM thermoplastic. Ask how the supplier checks compatibility before coating. | Material-specific sample parts, documented coating process, and a trial on the same print material and finish. | Different plastics and resins can react differently to cleaners, primers, solvents, and curing conditions. |
| 2 | Surface preparation | Ask how the supplier removes support marks, powder, oils, and visible layer lines, and how preparation is controlled to avoid changing critical features. | Written preparation steps and an approved first-article sample showing the agreed surface finish. | Paint appearance and adhesion depend heavily on the condition and cleanliness of the substrate. |
| 3 | Primer and coating compatibility | Confirm the proposed primer, topcoat, and curing process are suitable for the printed material and the part’s intended use. | Coating technical data sheets, safety data sheets, and results from a part-specific coating trial. | An unsuitable coating system can cause poor adhesion, surface defects, or damage to the printed part. |
| 4 | Adhesion testing | Agree on the test method, acceptance criteria, test location, and whether testing will be performed on representative production parts or witness samples. | For applicable coatings and substrates, cross-cut methods include ISO 2409 or ASTM D3359. Confirm suitability for the part and coating system. | A documented test provides a more consistent way to assess coating adhesion than visual inspection alone. |
| 5 | Coating thickness and dimensional control | Identify critical dimensions, masking areas, fit surfaces, and acceptable coating build-up. Confirm how dimensions are checked after painting. | Dimension inspection against the approved drawing; ISO 2808 describes methods for determining paint-film thickness where applicable. | Coating adds material and can affect fits, holes, mating surfaces, and other functional features. |
| 6 | Color and gloss consistency | Specify a physical color reference or agreed color coordinates, gloss level, viewing conditions, and acceptable variation. | Approved color-and-gloss sample; color measurement using an agreed method and gloss measurement such as ASTM D523 when appropriate. | Clear specifications help reduce subjective disagreements and improve consistency between batches. |
| 7 | Appearance inspection | Define acceptable limits for runs, orange peel, dust, pinholes, scratches, exposed substrate, and edge coverage. | Written visual inspection standard with lighting and viewing-distance conditions, plus retained approved samples. | Clear defect criteria make visual acceptance more repeatable across operators and production lots. |
| 8 | Quality management and traceability | Ask how the supplier records inspection results, identifies production lots, handles nonconforming parts, and manages process changes. | Relevant quality records and, if claimed, a current ISO 9001 certificate whose scope and issuing body can be checked. | Traceable records support consistent production and investigation of quality issues. |
| 9 | Environmental and chemical documentation | Confirm which coating materials are used and which regulatory requirements apply to the product’s destination and end use. | Current safety data sheets and relevant compliance documents; verify any claimed ISO 14001 certification independently. | Environmental and chemical requirements depend on the coating, location, application, and target market. |
| 10 | Sampling, capacity, and delivery controls | Establish sample approval steps, production capacity, lead-time assumptions, packaging protection, and how repeat orders will match the approved sample. | Documented sample sign-off, production schedule, packaging proposal, and agreed inspection plan for the order. | Planning and approval controls help align expectations for quality, delivery, and repeatability. |