| 1. Match the machine to the part and mold | Hydraulic clamping machine | Uses hydraulic power for clamping and injection. Available across a broad range of clamping forces and shot sizes. | Confirm that clamping force, injection capacity, platen dimensions, tie-bar spacing, and mold-opening stroke suit the mold and part. | General-purpose molding and applications that need substantial clamping force or flexible machine configurations. |
| 2. Compare energy use and process control | All-electric machine | Electric servo drives operate movements such as injection, clamping, and metering. They can provide precise, repeatable movement and avoid hydraulic oil in the drive system. | Compare measured energy consumption for your process, repeatability requirements, available service support, and the cost of any specialized components. | Clean production environments, precision parts, and operations where consistent cycles and energy monitoring are priorities. |
| 3. Evaluate the trade-off between drive systems | Hybrid machine | Combines electric and hydraulic drive elements. The exact combination varies by machine design. | Ask which movements are electric or hydraulic, and compare cycle performance, energy use, maintenance needs, and total cost with alternative configurations. | Production that needs a balance of hydraulic capability and electric control features. |
| 4. Consider how the mold will be loaded and operated | Vertical injection machine | Uses a vertical clamping arrangement; many configurations allow inserts to be placed in the mold before injection. | Check operator access, insert-loading method, automation options, safety guarding, and the usable mold area. | Insert molding and applications where gravity or convenient access helps with placing components. |
| 5. Check floor-space and mold-access requirements | Two-platen machine | Uses two main platens and a clamping arrangement that can allow a shorter machine footprint than some conventional layouts at comparable clamping force. | Verify overall machine dimensions, mold-opening space, service access, platen size, and compatibility with the plant layout. | Large molds or facilities where machine length and mold access are important constraints. |
| 6. Compare clamping mechanisms, not just rated force | Toggle-clamp machine | A mechanical linkage multiplies clamping force near the end of the closing movement. Machine designs and operating characteristics vary. | Review mold-height range, opening stroke, clamp movement, maintenance requirements, and whether the clamping force is suitable for the projected part area and process. | High-volume production with established molds and cycle requirements suited to the selected clamp design. |
| 7. Plan for materials and processing conditions | Screw, barrel, and injection-unit configuration | Injection units differ in screw diameter, screw design, shot capacity, and material-contact surfaces. | Size the shot for the part, runner, and process; check material compatibility, residence time, plasticizing capacity, and any wear-resistant options needed for abrasive or corrosive resins. | Any application, especially those using engineering resins, recycled material, filled compounds, or a wide range of shot sizes. |
| 8. Match the number of materials to the product design | Multi-component or multi-shot configuration | Can inject more than one material or color using additional injection units and a suitable mold and control system. | Confirm injection-unit layout, sequencing controls, mold interfaces, material compatibility, and the required tooling and process-development budget. | Parts that combine materials or colors in one molding cycle, such as selected overmolded or two-material products. |
| 9. Verify capability for small, precise parts | Micro-molding or small-shot configuration | Designed around low shot volumes and precise injection control; suitability depends on the complete machine, screw, mold, and process setup. | Request trials using representative materials and molds. Review shot-size range, shot consistency, venting, temperature control, and part inspection capability. | Small components with tight dimensional or weight requirements, when validated through process trials. |
| 10. Assess automation, service, and lifetime cost | High-speed or automation-ready cell | May combine a machine with a robot, conveyor, part-removal equipment, or auxiliary systems. Actual output depends on the complete cycle and part handling. | Compare the full installed cost, cycle-time assumptions, energy and utility needs, safety integration, spare-parts availability, training, and local service response. | Stable, repeatable production where reduced handling time and dependable equipment support are important. |