| 1 | Power Rack
Choose safety and expandability over decorative accessories. | Commercial steel tubing, approximately 3 mm wall thickness; powder-coated finish; bolted or welded frame. | Adjustable J-hooks, safety bars or straps, pull-up bar, floor anchors, compatible cable and landmine attachments. | Static frame capacity commonly 450–900 kg, depending on design and anchoring. | $650–$1,500 | $180–$500 | $80–$180 | $910–$2,180 | Verify steel gauge, weld quality, hole spacing, anchor requirements, replacement parts, and packed dimensions. |
| 2 | Functional Trainer / Cable Crossover
Compare smooth movement and serviceability. | Welded steel frame, galvanized or stainless cable, sealed pulleys, and cast-iron or steel weight stacks. | Independent pulley adjustment, dual handles, ratio options, protective shrouds, and corrosion-resistant cable ends. | Common weight stacks of 70–100 kg per side; user load depends on pulley ratio. | $1,500–$4,000 | $400–$1,200 | $180–$450 | $2,080–$5,650 | Request pulley ratio, cable replacement cost, stack increments, maximum ceiling height, and assembly requirements. |
| 3 | Adjustable Training Bench
Prioritize stability, adjustment range, and upholstery. | Heavy-gauge steel frame, high-density foam, abrasion-resistant vinyl, and stainless or zinc-plated adjustment hardware. | Flat-to-incline positions, back-pad gap, transport wheels, ladder adjustment, and replaceable upholstery. | Typical rated capacity of 250–450 kg, including user and lifted load. | $250–$750 | $80–$250 | $40–$120 | $370–$1,120 | Check seat stability, maximum angle, upholstery thickness, frame welds, packed volume, and spare-pad availability. |
| 4 | Olympic Barbell
Match bar specification to lifting style. | Heat-treated alloy steel shaft, chrome or ceramic coating, and bronze or composite bushings. | 28–29 mm shaft, 20 kg standard weight, tensile-strength rating, knurling pattern, sleeve rotation, and corrosion protection. | Approximately 600–1,500 kg stated static or test capacity; actual use depends on bar type. | $140–$450 | $35–$120 | $20–$70 | $195–$640 | Confirm shaft diameter, sleeve length, straightness tolerance, coating warranty, and packaging against bending. |
| 5 | Bumper Plate Set
Compare rubber quality, diameter consistency, and odor. | Virgin or recycled rubber plates with stainless or brass-reinforced steel hubs. | Standard 450 mm diameter, colored weight coding, raised lettering, calibrated thickness, and low-bounce formulation. | Sets commonly range from 100–160 kg; drop suitability varies by floor and plate design. | $750–$2,000 per 100–160 kg set | $220–$700 | $50–$180 | $1,020–$2,880 | Ask for weight tolerance, hub inner diameter, rebound behavior, odor-control process, and storage temperature limits. |
| 6 | Rubber Hex Dumbbell Set
Calculate shipping weight before ordering large quantities. | Solid cast-iron heads with rubber coating and a chrome or stainless steel textured handle. | Hexagonal heads, handle knurling, molded end markings, compact rack compatibility, and uniform weight increments. | Common commercial sets cover 2.5–30 kg per dumbbell. | $1,500–$4,500 per 2.5–30 kg set | $450–$1,500 | $100–$300 | $2,050–$6,300 | Compare actual set weight, coating thickness, odor, handle diameter, carton strength, and rack requirements. |
| 7 | Leg Press / Hack Squat Machine
Inspect frame engineering and user ergonomics. | Welded structural steel, linear bearings or rollers, reinforced sled, and high-density molded pads. | Adjustable backrest, safety stops, footplate angle, weight horns, guide-rail protection, and accessible maintenance points. | Common plate-loaded capacity of 300–500 kg, subject to manufacturer testing. | $3,000–$8,000 | $900–$2,500 | $250–$700 | $4,150–$11,200 | Confirm ceiling height, floor loading, delivery access, bearing replacement process, and user height range. |
| 8 | Selectorized Lat Pulldown
Choose consistent resistance and easy adjustments. | Powder-coated steel frame, steel weight stack, nylon-coated cable, sealed pulleys, and molded seat components. | Adjustable thigh pads, self-aligning seat, magnetic pin, instructional placard, shrouded stack, and multiple handles. | Typical stack range of 70–120 kg; effective resistance depends on pulley ratio. | $2,000–$5,000 | $500–$1,500 | $180–$500 | $2,680–$7,000 | Check seat adjustment, cable travel, stack increments, minimum ceiling height, user access, and spare-pin availability. |
| 9 | Strength Training Flooring
Buy by installed cost, not square-meter price alone. | High-density vulcanized rubber tiles or rolls; interlocking edges or adhesive installation. | 15–30 mm thickness, low odor, slip resistance, impact absorption, beveled edges, and easy replacement. | Suitable for free-weight zones when subfloor, thickness, and installation are correctly specified. | $10–$28 per m² | $4–$14 per m² | $2–$6 per m² | $16–$48 per m² | Measure wastage, verify fire and slip ratings, test odor, confirm cleaning chemicals, and include installation labor. |
| 10 | Plate and Dumbbell Storage
Use storage to reduce damage, clutter, and handling costs. | Welded steel frame, reinforced weight horns, rubber contact points, and powder-coated or zinc-plated hardware. | Vertical or horizontal layout, locking casters, protective saddles, anti-tip design, and modular capacity. | Common capacity of 250–600 kg, depending on rack type and floor anchoring. | $300–$1,000 | $100–$350 | $40–$120 | $440–$1,470 | Match rack footprint to equipment, verify center of gravity, check wheel locks, and confirm maximum shelf or horn load. |
08045479132
Send Inquiry
Send Inquiry
Send SMS
