| Typical application | Small foundries, laboratories, and frequent alloy changes | Production foundries needing rapid melting and responsive temperature control | Higher-volume melting where a larger batch capacity is useful |
| Indicative molten-metal capacity | 50–100 kg per batch | 100–250 kg per batch | 200–500 kg per batch |
| Indicative purchase budget (USD) | $15,000–$35,000 | $35,000–$90,000 | $45,000–$110,000 |
| Planning electricity use | Approximately 650–900 kWh per tonne melted | Approximately 500–750 kWh per tonne melted | Approximately 650–900 kWh per tonne melted |
| Annual throughput used for comparison | 100 tonnes | 200 tonnes | 350 tonnes |
| Estimated annual electricity cost | $7,800–$10,800 | $12,000–$18,000 | $27,300–$37,800 |
| Electricity-cost assumption | Illustrative industrial tariff of $0.12/kWh. Actual consumption and tariff depend on alloy, charge condition, operating schedule, furnace setup, and local utility rates. |
| Routine maintenance planning allowance | $2,000–$6,000 per year | $4,000–$10,000 per year | $5,000–$12,000 per year |
| Maintenance items to check | Crucible and refractory condition, heating elements, thermocouples, contactors, and insulation | Crucible/refractory, induction coil and cooling circuit, power electronics, sensors, and electrical connections | Crucible and refractory, heating elements, temperature controls, insulation, and tilting or lifting mechanisms if fitted |
| Estimated 5-year ownership cost | $64,000–$119,000 | $115,000–$230,000 | $206,500–$359,000 |
| 5-year cost includes | Indicative purchase budget + five years of estimated electricity and routine maintenance allowances. Excludes labor, financing, taxes, installation, building or electrical upgrades, production losses, and major unplanned repairs. |
| Maintenance profile | Generally straightforward; element and refractory life depend on temperature, duty cycle, and operating practices. | Requires attention to cooling-water quality and flow, coil condition, and power-electronics service requirements. | Similar checks to a compact resistance furnace, with potentially greater refractory and mechanism service needs due to larger capacity. |
| Supplier support to request | Written warranty scope; commissioning and operator training; spare-parts list and lead times; service contact and response-time commitment; troubleshooting documentation; and availability of qualified technicians. |
| Best-fit buying priority | Lower initial cost, simpler operation, and modest batch sizes | Faster melting and potentially lower energy use, subject to workload and installation requirements | Higher batch capacity and throughput, with careful evaluation of power supply and floor-space needs |
| Key questions before ordering | Confirm the metal and alloy, usable capacity, required melt rate, daily operating hours, electrical service, cooling needs, installation scope, safety features, and the supplier’s guaranteed performance conditions. |