| Inductive proximity | Detects changes in an electromagnetic field caused by a nearby conductive object. | Ferrous and non-ferrous metals; range is generally greatest for steel. | Approximately 1–40 mm, depending on sensor size and target material. | PNP or NPN transistor; NO or NC; some models offer IO-Link. | Confirm supply voltage, output polarity, load current, switching frequency, flush or non-flush mounting, and target material. | Metal part presence, machine tooling, conveyor position detection. |
| Capacitive proximity | Detects changes in capacitance when a target enters the sensing field. | Metal and non-metal materials, including plastics, powders, liquids, and granules. | Typically up to about 25 mm; the usable distance varies with target material and adjustment. | PNP or NPN transistor; NO or NC; some models offer IO-Link. | Check sensitivity adjustment, mounting distance, moisture or product buildup, supply voltage, and output type. | Level detection through non-metallic walls, material presence, packaging lines. |
| Photoelectric | Uses a light beam and detects interruption or reflection of that beam. | Most solid objects; performance depends on color, reflectivity, size, and surface finish. | From a few centimeters to tens of meters, depending on sensing mode and model. | PNP or NPN transistor; relay on some models; light-on or dark-on operation. | Choose through-beam, retro-reflective, or diffuse mode; check ambient-light immunity, reflector needs, alignment, and output wiring. | Object counting, package detection, conveyor monitoring, position sensing. |
| Ultrasonic | Measures the time taken for emitted sound waves to return from a target. | Many solid and liquid targets, including dark, transparent, or reflective surfaces. | Commonly about 20 mm to several meters, depending on the model. | Switching output, analog voltage or current, or serial communication on selected models. | Verify blind zone, beam width, response time, target angle, temperature effects, and required output signal. | Distance measurement, liquid level monitoring, detection of transparent objects. |
| Magnetic position sensor | Detects a magnetic field, commonly from a magnet attached to a moving component. | Magnetic targets or magnets installed on actuators and moving equipment. | Usually a short sensing distance; exact operating distance depends on the sensor and magnet. | Reed contact or electronic PNP/NPN output, depending on design. | Check magnet type and orientation, mounting position, switching frequency, contact or transistor output, and electrical load. | Pneumatic cylinder position detection, door and guard position sensing. |
| Limit switch | Uses mechanical contact and actuator movement to change electrical contacts. | Objects that can physically contact a lever, roller, plunger, or other actuator. | Contact-based; operating travel and force are model-specific. | Mechanical contacts, commonly NO and NC configurations. | Confirm actuator style, travel, operating force, contact rating, electrical category, and mechanical life. | End-of-travel detection, machine interlocks, position confirmation. |
| Rotary encoder | Converts shaft rotation into position or speed signals. | Rotating shafts and mechanisms. | Resolution is specified in pulses or counts per revolution; measurement range depends on the application. | Incremental pulse outputs or absolute digital interfaces, depending on model. | Match shaft or mounting style, resolution, supply voltage, signal format, maximum speed, and controller interface. | Motor feedback, speed monitoring, length measurement, positioning systems. |