| 1. Confirm machine and attachment compatibility | Check the excavator’s operating weight, coupler interface, pin dimensions, hydraulic system, and the attachments’ permitted loads. Confirm that the tilt range and coupler configuration suit the intended work. | Compare the machine and coupler specifications with attachment requirements. Confirm allowable loads and operating limits in the relevant manuals. | A compatible, correctly rated assembly helps prevent improper fit, overload, and unexpected movement. |
| 2. Verify ISO 13031:2016 conformity | Check whether the coupler’s design and safety information address the applicable requirements of ISO 13031:2016, which covers safety requirements for quick couplers used on earth-moving machinery. | Request the manufacturer’s conformity documentation, operating instructions, and information identifying the applicable standard and product configuration. Verify that documents match the unit being considered. | A documented review is more reliable than relying on a general claim or a label alone. Confirm the applicable requirements for the specific machine and use. |
| 3. Examine the primary locking system | Assess how the locking mechanism engages and retains the attachment, and whether its design helps reduce the risk of incomplete engagement or unintended release. | Review the operating and inspection instructions. Have a qualified person demonstrate the prescribed attachment-change procedure and verify engagement using the methods specified by the manufacturer. | Secure engagement is essential because an attachment that is not correctly retained can become hazardous during operation. |
| 4. Check lock-status indication and verification | Look for clear means of determining whether the attachment is locked, such as a visual indicator or another verification method specified for the coupler. Consider visibility from the operator’s position and in typical site conditions. | Check the indicator or verification procedure against the manual. Confirm that operators can distinguish a fully engaged state from an incomplete or uncertain state. | Clear status checks help operators identify an unsafe condition before moving or using the attachment. |
| 5. Assess hydraulic and control-system safeguards | Review how the coupler is actuated, how controls are protected against unintended operation, and what happens if hydraulic pressure is lost or a hose or connection fails. | Consult the coupler and machine documentation for control operation, pressure requirements, failure-response information, and any required inspection or maintenance procedures. | Understanding the control and failure behavior helps prevent accidental release and supports safe integration with the excavator. |
| 6. Evaluate tilt-system limits and operating stability | Check the stated tilt angle, load limits, attachment clearance, and any restrictions on lifting, digging, or working at particular orientations. Consider how the added coupler weight affects the machine’s rated capacity. | Use the machine’s capacity information and the coupler and attachment manuals. Confirm the combined configuration is permitted for the planned task and operating conditions. | Tilt capability does not increase the excavator’s rated capacity. Staying within the documented limits helps reduce overload and stability risks. |
| 7. Review inspection, maintenance, and operator training | Check for defined inspection intervals, wear limits, maintenance tasks, attachment-change instructions, and training requirements. Ensure operators know how to verify engagement before work. | Review the manuals and inspection checklist. Confirm that inspection records can be maintained and that damaged, worn, or uncertain components can be removed from service for assessment. | Regular checks and trained operation help identify wear or faults before they compromise the locking system or safe use. |