| 1 | Resistance value and tolerance | Confirm the specified resistance in ohms and its tolerance. The resistance must meet the drive manufacturer’s permitted braking-resistor range; do not select a value below the drive’s stated minimum. | Variable-frequency-drive systems, servo drives, and other inverter-controlled motors. |
| 2 | Power and duty-cycle rating | Request continuous and short-time power ratings, permitted braking duration, repetition interval, and the conditions used for rating. Match these to the drive manual and the machine’s actual deceleration cycle. | Frequent-start production lines, hoists, and equipment with repeated deceleration. |
| 3 | Braking-energy calculation support | Ask whether the supplier can review motor and load inertia, speed change, stopping time, cycle frequency, and energy returned during deceleration. Have the final sizing checked against the drive manufacturer’s instructions. | Centrifuges, winding equipment, machine tools, and high-inertia loads. |
| 4 | Thermal design and temperature limits | Check rated operating temperature, temperature-rise data, cooling requirements, and the specified clearances from nearby equipment. Resistors dissipate braking energy as heat and need adequate ventilation and heat-safe mounting. | Enclosed control panels, hot production environments, and installations with limited airflow. |
| 5 | Overtemperature protection | Determine whether a thermal switch or other overtemperature device is available, its electrical rating, and how it should be wired into the system. Confirm that protection does not replace correct resistor sizing. | Machines operating unattended or where resistor overheating could create a hazard. |
| 6 | Enclosure and ingress protection | Verify enclosure material, ventilation design, mounting orientation, and stated IP rating. Check that the rating suits the installation environment and does not compromise heat dissipation. | Dusty workshops, outdoor cabinets, and industrial installations exposed to moisture. |
| 7 | Mechanical construction and mounting | Review dimensions, terminal type, mounting details, vibration suitability, and protection against accidental contact with hot surfaces. Request a drawing before approving the installation. | Mobile machinery, vibrating equipment, and compact control-panel layouts. |
| 8 | Materials and operating environment | Request details of the resistive element, insulation, terminals, and surface finish. Check stated limits for ambient temperature, humidity, corrosion, and vibration against the site conditions. | Packaging lines, port equipment, food-processing areas, and corrosive or humid locations. |
| 9 | Testing and documentation | Ask for a datasheet, dimensional drawing, resistance and power test records, installation instructions, and applicable conformity documentation. Check that reports apply to the offered model and ratings. | OEM projects, export orders, and installations requiring documented quality review. |
| 10 | Customization, lead time, and after-sales support | Confirm available resistance and power options, enclosure customization, sample and production lead times, warranty terms, replacement availability, and technical response arrangements. | Custom machinery, replacement projects, and production lines where downtime is costly. |