| Hose construction | Flexible PVC hose reinforced with high-tenacity polyester yarn; reinforcement patterns and PVC formulations vary by product. | Ask for a product cross-section or specification sheet confirming the liner, reinforcement, and outer cover construction. |
| Nominal inner diameter | Common market sizes range from approximately 25 mm to 300 mm (1 in to 12 in), depending on the product range. | Confirm the measured inside diameter and tolerance. Do not rely on nominal size alone when matching existing fittings. |
| Working pressure | Product lines may cover approximately 0.2–1.0 MPa (2–10 bar); the available pressure depends on diameter, reinforcement, and hose construction. | Request working-pressure and burst-pressure values for the exact diameter and model. Check the test method and safety factor used. |
| Roll length | Suppliers may offer different roll lengths, with 20 m, 50 m, and 100 m commonly requested options. | Confirm actual usable length, length tolerance, packaging method, and whether custom roll lengths are available. |
| Color and identification | Common options include blue, green, red, and other production colors; surface markings can identify size or pressure rating. | Specify color, print content, and marking durability in the purchase order, and request a production sample if appearance is critical. |
| Temperature suitability | Allowable operating temperature depends on the PVC compound and hose design; there is no single range that applies to every product. | Obtain the supplier’s stated minimum and maximum service temperatures for the intended fluid and operating conditions. |
| Typical applications | Irrigation, agricultural water transfer, construction-site drainage, and general water discharge are common uses. | Confirm suitability for the actual fluid, pressure, outdoor exposure, abrasion, and operating environment. |
| Couplings and fittings | Hoses may be supplied with compatible couplings or as hose-only rolls, depending on the order specification. | Check coupling material, connection standard, fit, and the method used to secure the coupling to the hose. |
| Quality-control documentation | Relevant checks can include dimensional inspection, pressure testing, burst testing, and inspection of hose-to-reinforcement bonding. | Request inspection records or test reports tied to the ordered specification and confirm any required third-party inspection before shipment. |