| 1 | Compact Electric Sink Auger | Kitchen sinks, bathroom basins, showers, and small branch lines | 20–75 mm (¾–3 in) | 7–15 m cable | 0.25–0.75 kW; cable speed commonly 5–10 m/min | 8–18 kg | Use a ground-fault or residual-current device, eye protection, gloves, and a cable guard. Keep hands away from rotating cable. | Flush and dry the cable after use; inspect for kinks, corrosion, and damaged insulation; lubricate moving parts as specified. | Confirm voltage, frequency, plug type, IP rating, spare cable availability, and translated operating instructions. |
| 2 | Portable Drum Machine | Residential branch drains and light commercial drain lines | 50–100 mm (2–4 in) | 15–30 m cable | 0.5–1.1 kW; variable cable rotation typically 150–300 rpm | 25–55 kg | Use a torque-limiting clutch or foot switch where available; secure the drum and avoid loose clothing near rotating parts. | Clean the drum, drain standing water, check cable tension, and replace worn cutters before they break inside the pipe. | Check shipping dimensions, lifting points, wheel quality, electrical certification, and compatibility with local service networks. |
| 3 | Medium-Duty Drum Machine | Repeated residential work and medium-sized commercial lines | 75–150 mm (3–6 in) | 23–46 m cable | 0.75–1.5 kW; commonly 170–325 rpm | 45–90 kg | Use a foot-controlled switch, cable-feed guide, protective gloves, face protection, and a properly grounded supply. | Wash and disinfect the cable, inspect the clutch and bearings, check wheel fasteners, and store the machine in a dry area. | Verify crate size, net and gross weight, customs classification, replacement cutter standards, and access to consumable parts. |
| 4 | Sectional Cable Machine | Long commercial lines, main drains, and heavy roots or scale | 75–200 mm (3–8 in) | 30–100 m using interchangeable sections | 1.1–2.2 kW; commonly 200–400 rpm | 55–120 kg excluding cable sections | Use a cable-loading device or lifting aid, keep sections supported, and never handle rotating cable with bare hands. | Clean and oil cable sections, inspect couplings for cracks, check the motor brake, and replace distorted sections promptly. | Assess container or pallet requirements, modular cable packaging, lifting equipment, export documentation, and local occupational-safety rules. |
| 5 | High-Torque Sectional Machine | Municipal, industrial, and severely blocked large-diameter drains | 100–250 mm (4–10 in) | 60–150 m using heavy-duty sections | 2.2–4.0 kW; commonly 200–450 rpm | 100–220 kg excluding cable sections | Require trained operators, emergency stop controls, guarding, lockout procedures, and mechanical lifting for cable handling. | Perform scheduled gearbox, bearing, brake, and electrical inspections; document cable and cutter wear. | Confirm three-phase or single-phase requirements, motor protection, import certification, warranty coverage, and technician training. |
| 6 | Portable High-Pressure Water Jetter | Grease, sludge, soft deposits, and recurring building drain blockages | 50–200 mm (2–8 in) | 30–90 m hose | 4–15 kW; approximately 100–250 bar and 15–60 L/min | 60–180 kg | Use pressure-rated hoses, trigger control, splash protection, non-return devices, and protective footwear; never direct the jet at people. | Clean inlet filters, inspect hoses and couplings, drain the pump in freezing conditions, and use suitable water treatment where required. | Check water-source requirements, local wastewater discharge rules, pressure-unit conventions, engine or motor certification, and hose replacement availability. |
| 7 | Trailer-Mounted Drain Jetter | Large sewer lines, municipal work, industrial sites, and mobile service fleets | 100–600 mm (4–24 in) | 60–150 m hose | 15–75 kW; approximately 150–350 bar and 40–300 L/min | 500–2,500 kg including trailer and water tank | Follow trailer, road, pressure-vessel, and confined-space rules; use wheel chocks, hose restraints, exclusion zones, and emergency shutdowns. | Service the engine, pump, filters, tank, brakes, tires, lights, and hose reel according to operating hours and road regulations. | Confirm road homologation, towing regulations, axle load, water-tank capacity, port handling, emissions requirements, and destination-country registration. |
08045479132
Send Inquiry
Send Inquiry
Send SMS
