| Belt conveyor | Cartons, totes, parcels, and some bulk materials; straight runs and gentle inclines. | About 500–3,000 cartons/hour per line in many unit-handling layouts; bulk capacity varies greatly with belt width, speed, and material. | Guard nip and pinch points; provide accessible emergency stops and safe access for belt cleaning and maintenance. | Generally straightforward to connect to photoelectric sensors, VFDs, PLCs, and upstream or downstream control systems. | A versatile option for continuous movement; accumulation and precise singulation may require additional equipment. |
| Powered roller conveyor | Flat-bottom cartons, totes, and pallet loads; transport, buffering, and accumulation. | Often around 500–3,000 cartons/hour on a line; actual rate depends on carton length, spacing, and accumulation-zone logic. | Guard roller nip points and drive components; use suitable zone controls to reduce unwanted contact or product pressure. | Zone controllers and sensors support accumulation; confirm PLC interface, fault reporting, and restart behavior. | Good for buffering and merging compatible loads; unsuitable for soft packages or loads with unstable, uneven bottoms. |
| Chain pallet conveyor | Heavy pallets, fixtures, and rigid loads in manufacturing or warehouse flows. | A layout-dependent range is roughly 300–1,000 pallet moves/hour per line; transfers, stops, and spacing can reduce the sustained rate. | Guard chains, sprockets, and transfer points; assess crush hazards and provide lockout procedures for maintenance. | Requires defined pallet dimensions, orientation, load limits, and handshakes with lifts, turntables, or production equipment. | Robust for heavy, repeatable loads; less flexible when pallet sizes or load bases vary. |
| Parcel sorter (cross-belt or sliding-shoe type) | High-volume parcel or carton routing to multiple destinations. | Commonly designed for several thousand to tens of thousands of parcels/hour; capacity is system-specific and depends on sorter speed, spacing, and destination layout. | Protect moving mechanisms and discharge points; include guarding, emergency stops, safe jam-clearing access, and controlled restart procedures. | Needs reliable item identification, destination logic, exception handling, and tested links to WMS/WCS and scanning equipment. | Best suited to many destinations and high parcel volumes; requires more controls, commissioning, and maintenance than basic conveying. |
| Vertical reciprocating conveyor or lift | Moving cartons, totes, or pallets between floors or mezzanine levels. | Often tens to a few hundred load transfers/hour; lift height, travel time, loading method, and door interlocks determine the actual rate. | Use interlocked landing doors, guarding against access to the shaft, overload protection, and appropriate inspection and maintenance procedures. | Coordinate floor-level calls, occupancy signals, and upstream/downstream accumulation; verify building and fire-safety interfaces as applicable. | Saves floor space and connects levels; typically becomes a flow constraint if demand exceeds its cycle capacity. |
| Overhead conveyor | Hanging garments, painted components, or other loads suited to overhead carriers. | Typically specified in carriers or loads per hour; capacity depends on carrier pitch, chain speed, route length, and process dwell time. | Assess suspended-load and falling-object risks; guard accessible drives and provide safe maintenance access at elevated sections. | Plan carrier identification, workstation controls, route branches, and interfaces with process equipment and production scheduling. | Keeps floor space available; requires suitable building structure and is not appropriate for every load or facility. |