| Compact control panel | 10.1–12.1 in; commonly 1280 × 800 or 1280 × 1024 | Resistive for gloved or stylus input; projected capacitive for multi-touch where supported | About 250–500 cd/m² | Choose a sealed front bezel and an ingress-protection rating appropriate to the cleaning and splash conditions | HDMI or DisplayPort; USB for touch; panel cutout or VESA mounting, depending on design | Machine control stations and space-constrained operator panels |
| General-purpose HMI | 15–17 in; commonly 1024 × 768, 1280 × 1024, or 1366 × 768 | Resistive or projected capacitive; select based on gloves, input method, and interface requirements | About 250–500 cd/m² | A flush, gasketed front can simplify wipe-down; verify the stated rating applies to the installed front face | HDMI, DisplayPort, or VGA may be available; USB touch; panel or VESA mounting | Production-line HMIs, process displays, and machine interfaces |
| Large-format operator display | 19–21.5 in; commonly 1280 × 1024 or 1920 × 1080 | Projected capacitive is common for direct multi-touch interaction; non-touch versions are also used | About 250–500 cd/m² for many indoor applications | Check bezel sealing, glass thickness, and impact requirements for the installation environment | HDMI or DisplayPort; USB for touch; confirm cutout dimensions and VESA pattern | Dashboards, supervisory control, and applications needing more on-screen information |
| High-brightness installation | Typically 15–21.5 in; resolution depends on display size and application | Touch optional; assess readability and touch performance under the actual lighting conditions | Often 700 cd/m² or higher for high-brightness designs; confirm the specified value | Consider optical bonding, anti-glare treatment, temperature range, and direct-sunlight limits where relevant | Digital video inputs; verify power input, cooling needs, and mounting clearances | Bright work areas, semi-outdoor locations, or installations with difficult ambient light |
| Legacy-system replacement | Often 15–19 in; match the existing resolution and aspect ratio where software requires it | Select resistive or non-touch when compatibility with existing workflows is important | About 250–500 cd/m² for typical indoor use | Compare bezel dimensions, cutout, connector position, and sealing before replacement | VGA may be needed alongside newer video inputs; confirm signal timing and touch-driver compatibility | Retrofits where existing cabinets, cabling, or control systems must be retained |