| Slot-Die Coating Machine | Metered adhesive is delivered through a precision die onto a moving web or substrate. | Slot die and shim; gear or precision metering pump; manifold; web-tension controls; die-positioning system. | Die-lip condition, flow distribution, pump stability, and web alignment influence coating uniformity, edge quality, and coat-weight consistency. | Pressure-sensitive adhesives, hot-melt adhesives, battery-related coatings, films, tapes, and specialty laminates. | Best suited to buyers seeking controlled, continuous application. Confirm adhesive viscosity, operating temperature, target coat weight, and required coating width. |
| Gravure Coating Machine | An engraved roll picks up adhesive and transfers a controlled pattern or film to the substrate. | Engraved coating roll; doctor blade; impression roll; adhesive pan or circulation system; drying section. | Cell geometry, roll condition, blade setup, and adhesive flow affect transfer volume, pattern definition, and the risk of streaks or uneven coverage. | Thin adhesive layers on films, paper, foils, labels, and packaging materials. | Check whether the engraved-roll pattern matches the desired coating weight and coverage. Drying and ventilation requirements matter for water-based or solvent-based systems. |
| Reverse-Roll Coating Machine | Metering and applicator rolls rotate in opposite directions at the coating nip to control adhesive transfer. | Applicator and metering rolls; adjustable nip; roll-drive system; alignment mechanism; web-tension controls. | Roll runout, surface finish, nip setting, speed ratio, and alignment influence film thickness, smoothness, and cross-web consistency. | Pressure-sensitive tapes, films, paper, and other continuous-web products requiring a controlled adhesive layer. | Assess roll diameter and working width alongside the adhesive’s viscosity and solids content. Stable web handling is important for consistent results. |
| Knife-Over-Roll Coating Machine | A knife or blade meters adhesive on a substrate supported by a backing roll or coating bed. | Metering knife; blade holder; backing roll or bed; gap-adjustment system; web-guiding and tension controls. | Blade straightness, gap uniformity, support rigidity, and substrate thickness variation affect coat thickness and surface evenness. | Adhesive coating on textiles, nonwovens, paper, films, and flexible substrates. | Consider substrate compressibility and surface texture. A precise adjustment system helps when frequent changes in coating thickness are required. |
| Comma-Roll Coating Machine | A shaped metering roll controls the adhesive layer as the substrate passes through the coating zone. | Comma roll; backing or support roll; gap and pressure adjustment; drive system; web-tension and alignment controls. | Roll profile, gap setting, alignment, and substrate support influence coating smoothness and thickness consistency. | Water-based and other liquid adhesives on paper, textiles, nonwovens, and flexible films. | Review adhesive rheology and the substrate’s ability to maintain a stable path through the coating zone. Confirm cleaning and changeover needs. |
| Hot-Melt Adhesive Coating Machine | Solid adhesive is melted, metered, and applied through a heated die, nozzle, or roll-coating head. | Melting tank; heated hoses and manifolds; gear pump; applicator head; temperature sensors and controls. | Temperature stability, melt residence time, pump delivery, and applicator cleanliness affect viscosity, coat-weight consistency, and the likelihood of gels or interruptions. | Packaging, tapes, labels, hygiene products, and other applications using thermoplastic hot-melt adhesives. | Match the melting and delivery system to the adhesive’s processing requirements. Verify temperature zoning, filtration, safety provisions, and cleaning procedures. |
| Spray Coating Machine | Adhesive is atomized through one or more nozzles and deposited as a continuous layer or controlled pattern. | Spray nozzles; pressure or metering controls; pumps; nozzle positioning; extraction and overspray management. | Nozzle condition, spray pressure, distance, overlap, and adhesive viscosity determine pattern uniformity, edge definition, and overspray. | Foams, textiles, irregular surfaces, assemblies, and applications where non-contact or patterned application is useful. | Evaluate overspray control, ventilation, cleaning access, and adhesive compatibility with the nozzle system. Validate coverage on the actual substrate. |
| Transfer Coating and Laminating Machine | Adhesive is coated onto a release liner or carrier and then transferred to a second web through a laminating nip. | Coating head; release-liner unwind and rewind; laminating rolls; nip-pressure adjustment; web-guiding and tension systems. | Release properties, coating uniformity, nip pressure, and web tracking affect transfer completeness, bond consistency, and wrinkle formation. | Transfer tapes, labelstock, protective films, and products requiring a release liner or carrier. | Confirm liner release characteristics, adhesive compatibility, and the required laminate structure. Check that the machine can control tension on each web independently. |