| Room and delivery fit | Sofa width, depth, height, doorway and hallway clearances, and the fully reclined footprint. | Measure the intended room and delivery route before ordering. Compare the sofa's open-position dimensions and required wall clearance with the product specifications. | Record room, doorway, stairway, and open-position measurements; do not assume all recliners need the same wall clearance. |
| Leather description | The stated leather type and which sofa surfaces are covered in leather. | Ask for an upholstery-material breakdown. Some products use leather on seating surfaces and a different upholstery material on sides or backs; descriptions and terminology can vary. | Check the product specification or material label rather than relying on a general “leather” description. |
| Leather finish | Whether the leather is aniline, semi-aniline, pigmented, or another specified finish. | Finishes differ in appearance and resistance to marks or fading. Confirm the care instructions for the exact finish; do not assume one leather-care product suits every finish. | Request written cleaning and conditioning guidance from the seller or manufacturer. |
| Seats and comfort | Seat width, seat depth, back support, cushion feel, and whether each intended user can sit comfortably. | Test the sofa in both upright and reclined positions when possible. Check the stated seating capacity and weight limits in the product documentation. | There is no single seat size or weight limit suitable for every user; verify the specifications for the exact model. |
| Reclining mechanism | Smooth operation, stable frame, footrest movement, unusual noise, and secure locking or stopping behavior. | Operate every seat through its full range. Keep fingers, pets, and objects clear of moving joints and follow the product's operating instructions. | Stop using a seat if its mechanism binds, shifts unexpectedly, or makes a new persistent noise; consult the service instructions. |
| Power recliner components | Power supply, controls, cable condition, outlet location, and any stated battery or electrical requirements. | Route cables away from moving parts and walkways. Follow the manual for installation and disconnect power as directed before cleaning or servicing electrical components. | Check the model-specific voltage, adapter, and safety instructions; do not use damaged cables or adapters. |
| Seams and upholstery | Stitching, seams, panels, surface finish, and signs of cuts, cracking, peeling, or uneven wear. | Inspect all visible sides and creases before acceptance. Photograph existing damage and report it promptly according to the seller's delivery or return policy. | Natural variation in color or grain may occur; confirm acceptable variation with the product description. |
| Routine dust and debris | Dust, crumbs, and debris in seams, seat gaps, and around the mechanism. | Dust with a clean, soft cloth. Use a vacuum's soft-brush attachment carefully in crevices, following the care instructions for the upholstery. | A regular light clean helps prevent loose debris from building up; frequency depends on use and household conditions. |
| Spills and marks | Fresh spills, residue, or a change in color or texture. | Blot a spill gently with a clean, dry, absorbent cloth; avoid rubbing. Use water or a cleaner only if the specific care instructions allow it. | Test any approved product on a concealed area first. Avoid household solvents, abrasive cleaners, and unapproved stain removers. |
| Sunlight and heat | Exposure to direct sunlight, radiators, fireplaces, heating vents, or other strong heat sources. | Position the sofa away from prolonged direct sun and strong heat where practical. These conditions can contribute to fading or drying of upholstery over time. | Review the room's light and heat exposure before choosing the sofa's location. |
| Conditioning products | Whether the leather's care instructions recommend a conditioner or other treatment. | Use only a product approved for the stated leather type and finish. Apply it as directed; unnecessary or unsuitable products may alter the appearance. | There is no universal conditioning interval. Follow the product instructions instead of applying conditioner on an assumed schedule. |
| Warranty and support | Coverage for upholstery, frame, reclining mechanism, power components, labor, and exclusions. | Read the written warranty and keep purchase records and care documentation. Confirm how to request service and whether maintenance or cleaning requirements apply. | Coverage periods and terms differ by product and component; verify them before purchase. |