| 1. Upright compound brightfield |
About 40×–1,000× |
Transmitted visible light |
Routine examination of stained tissue sections, cells, and microorganisms on slides |
Versatile, familiar workflow; supports a broad range of objectives and slide-based samples |
Transparent, unstained samples often have low contrast; oil-immersion objectives require careful cleaning and use |
| 2. Inverted cell-culture microscope |
Commonly about 40×–400×; configurations vary |
Transmitted light, often with phase contrast or fluorescence options |
Observing adherent cells in culture flasks, dishes, and multiwell plates |
Objectives sit below the specimen, leaving room for culture vessels and manipulation from above |
Not every vessel or plate is compatible with every stage; confirm working distance and vessel clearance |
| 3. Phase-contrast microscope |
Typically about 100×–400× for routine cell work |
Transmitted light with phase optics |
Viewing live, transparent cells and other unstained specimens |
Enhances contrast in samples that are difficult to see in standard brightfield |
Requires compatible phase objectives and condenser settings; halos may appear around specimen edges |
| 4. Differential interference contrast (DIC) microscope |
Often about 100×–1,000×, depending on the configuration |
Transmitted polarized light with DIC prisms |
High-contrast imaging of unstained cells, embryos, and fine specimen structures |
Produces crisp contrast and an apparent relief-like effect in transparent specimens |
Needs matched optical components; the relief-like appearance is an imaging effect, not true surface topography |
| 5. Widefield fluorescence microscope |
Commonly about 100×–1,000× |
Excitation and emission filters with fluorescence illumination |
Imaging fluorescently labeled cells, proteins, and tissue sections |
Can reveal specific labeled targets and capture multiple fluorescence channels |
Out-of-focus light can reduce contrast in thick samples; fluorophores may fade with exposure |
| 6. Confocal laser-scanning microscope |
Objective-dependent, commonly about 100×–1,000× total magnification |
Laser scanning with a pinhole to reject out-of-focus emission |
Optical sectioning and 3D imaging of fluorescently labeled specimens |
Improves contrast in many thicker samples and supports acquisition of image stacks |
Can be slower than widefield imaging; laser exposure may cause photobleaching or phototoxicity |
| 7. Stereo microscope |
Typically about 5×–80×, depending on optics |
Reflected light, transmitted light, or both |
Dissection, sorting, specimen preparation, and inspection of larger objects |
Provides depth perception, a large working distance, and room for tools |
Lower magnification and resolution than a compound microscope; not intended for fine cellular detail |
| 8. Polarizing microscope |
Commonly about 40×–400×; higher magnifications may be available |
Crossed polarizers and transmitted or reflected light |
Analyzing minerals, crystals, fibers, and other birefringent materials |
Reveals optical anisotropy and interference colors useful for material identification |
Specialized optics and sample orientation matter; it is not a general substitute for biological fluorescence imaging |
| 9. Reflected-light metallurgical microscope |
Often about 50×–1,000×, depending on objectives |
Illumination reflected from an opaque specimen surface |
Examining polished metals, coatings, semiconductor surfaces, and other opaque materials |
Designed for specimens that transmit little or no light; supports surface and microstructure inspection |
Specimen preparation and surface finish strongly affect image quality; not designed for routine live-cell observation |
| 10. Whole-slide imaging microscope |
Commonly uses 20× or 40× scanning objectives; digital viewing can vary |
Automated slide scanning with digital image assembly |
Digitizing pathology or research slides for review, annotation, sharing, and image analysis |
Captures large slide areas and supports remote access and reproducible digital workflows |
Requires storage and image-management planning; scan quality depends on focus, staining, and scanning settings |